HQ Mould is engaged in Automotive Parts Moulding,
moulding of parts used in household items, chair moulding, pipe fitting
moulding, crate moulding, etc. The company uses injection moulding to
manufacture plastic moulds. This is a process in which a plastic material is
molted inside the injection moulding machine and then injected into a mould
placed in the machine. The molten plastic solidifies inside the mould to form
the plastic part. The solidified part is then ejected from the mould by an
ejection system.
HQ Mould uses advanced CNC/EDM/DMG/CMM machines for
injection moulding. Some of the moulds manufactured by the company have been
discussed here.
Automotive mould
Automotive mould manufactured by the company is front bumper mould.
Mould material used for the purpose is S45C. The mould in which the molten
plastic is injected has a single cavity. The machine used for injection
moulding process is 230 T injection machine. Ejector block is used as the
ejection system in the machine. The runner system is 9 valve hot runner. The
front bumper mould has a life of 150,000 shots.
Crate mould
Fruit crate mould is manufactured using either a single cavity or
double cavity mould. The mould material is 718 while the machine used for the
injection moulding process is 780T injection machine. Stripper plate is used as
the ejection system while the runner system is 4 pin point gate hot runner.
Mould has a life of 500,000 shots. Apart from fruit crate moulds, beer crate
moulds for 12 bottles are also manufactured.
No comments:
Post a Comment